Operator Positioning - Viking H-10 Installation Instructions And Safety Information

GATE OPERATOR INSTALLATION

Operator Positioning

!
IMPORTANT: All openings of a horizontal slide gate are guarded or screened from the
bottom of the gate to a minimum of 6 feet (1.83 m) above the ground to prevent a 2-1/4
inch (57.2 mm) diameter sphere from passing through the openings anywhere in the gate,
and in that portion of the adjacent fence that the gate covers in the open position.
Plans for Front Installation
Track
Concrete Pad
Plans for Rear Installation
Gate Operator
1 4
Gate In Open Position
Gate Operator
Concrete Pad
Track Gate Operator
Concrete Pad Concrete Pad
Gate In Open Position
Gate Operator Track Concrete Pad
Concrete Pad
Gate Operator Track Concrete Pad
Concrete Pad
Route Chain
As Shown
Gate Operator
Concrete Pad
Gate In Closed Position
Gate Operator
Gate In Closed Position
See Detail Below
Gate
Safety Guard
Not Supplied by
Viking Access Systems
Fixed Pulley
VIKING TECHNICAL SUPPORT 1.800.908.0884