Titan TTCSP40 Manual page 8

Safety information
> Only use replacement bars and chains specified by the manufacturer. Incorrect
replacement bars and chains may cause chain breakage and/or kickback.
> Follow the manufacturer's sharpening and maintenance instructions for the
saw chain. Decreasing the depth gauge height can lead to increased kickback.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use
low-vibration and low-noise operating modes as well as wear personal protective
equipment.
Take the following points into account to minimise the vibration and noise exposure risks:
> Only use the product as intended by its design and these instructions.
> Ensure that the product is in good condition and well maintained.
> Use correct attachments for the product and ensure they are in good condition.
> Keep a tight grip on the handles/gripping surfaces.
> Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
> Plan your work schedule to spread any high vibration tool use across a longer period
of time.
Emergency
Familiarise yourself with the use of this product by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will
help to prevent risks and hazards.
> Always be alert when using this product, so that you can recognise and handle
risks early. Fast intervention can prevent serious injury and damage to property.
> Stop the engine and disconnect the spark plug connector if there are
malfunctions. Have the product checked by a qualified professional and repaired,
if necessary, before you operate it again.
In case of fire stop the engine and disconnect the spark plug connector. Take
>
fire-extinguishing measures immediately if the product switch is no longer accessible.
WARNING! Never use water to extinguish the product on fire. Burning fuel must
be extinguished with special extinguishing agents! We recommend that you
keep a suitable fire extinguisher within reach in your work area! We recommend
to have dry powder fire extinguisher always available.
8
TTCSP40