Titan TTCSP40 Manual page 55

TTCSP40
Problem Possible cause
Engine does Air filter is soiled?
not reach
Spark plug is soiled (tip is
the maximum
rusted)?
speed.
Incorrect fuel or incorrect
mixture?
Carburetor setting not correct?
Excess Incorrect fuel or incorrect
smoke from mixture?
the engine.
Chain does Chain brake engaged?
not start.
Chain starts Chain brake is not engaged?
up before
Idling speed too high?
throttle trigger
is pressed.
Insufficient The saw chain oil tank empty?
chain
Oiling port clogged?
lubrication/
Incorrect saw chain lubrication
grease.
setting?
Troubleshooting
Solution
Clean the air filter.
Clean spark plug.
Stop the engine and empty
tank, then fill up with the correct
mixture of fuel to oil (40:1).
Have a qualified person adjust
the carburetor.
Stop the engine and empty
tank, then fill up with the correct
mixture of fuel to oil (40:1).
Disengage chain brake.
Engage chain brake.
Press throttle trigger again
slightly after starting.
Fill up saw chain oil.
Clean oiling port.
Increase the saw chain
lubrication.
55