Titan TTCSP40 Manual page 19

TTCSP40
4. Place the slot on the guide bar (2) over the 2 bolts (step 1, Fig. 3).
5. Push the guide bar (2) to the left towards the drive sprocket (step 2, Fig. 3).
6. Place the saw chain (3) over the drive sprocket and fit around the guide bar (2) (Fig. 4).
NOTE: This symbol
runs. Fit the saw chain (3) in the correct direction (Fig. 4).
3
2
7. Pull the guide bar carefully towards the right to tighten the saw chain. Make sure
the saw chain is placed above the chain catcher (17) (Fig. 5).
5
17
indicates the direction which the saw chain (3)
4
Drive sprocket
(behind the clutch)
2
1
Before you start
3
2
19