Operation - Titan TTCSP40 Manual

TTCSP40
Throttle trigger lock-out
The throttle trigger lock-out (8) prevents unintentional activation of the throttle trigger (10).
The throttle trigger can only be activated if the throttle trigger lock-out is pressed.
Chain catcher
The chain catcher (17) is intended to catch a torn saw chain (3) or saw chain which
has jumped out of the guide bar (2). Through regular maintenance of the guide bar (2)
and correct and regular tensioning of the saw chain (3), accidents of this type can be
prevented.
DANGER! Risk of injury! The product must only be put into operation if no
faults are found. If any safety equipment is defective, it must absolutely be
replaced before the next use.

Operation

Stop switch
Use the stop switch (11) switch to start and stop the engine.
> I position: The engine can start and run.
> O position: The engine stops. After pushing the stop switch (11) to O position, the
stop switch (11) automatically returns to the I position.
Check before starting:
1. Check the product, as well as accessories for damage before each use. Do not use
the product if it is damaged or shows wear.
2. Double check that accessories and the guide bar/saw chain are properly fixed.
3. Check the fuel level and chain oil level, refill if necessary.
4. Always hold the product by its handles. Keep the handles dry and clean to ensure
safe support.
5. Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
6. Stop the engine immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before
putting it down.
7. Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the product.
NOTE: In some countries regulations define at what time of the day and on what
special days products are allowed to be used and what restrictions apply! Ask
your community for detailed information and observe the regulations in order
to preserve a peaceful neighbourhood and avoid committing administrative
offenses!
Product functions / Operation
31