Titan TTCSP40 Manual page 24

Before you start
Filling up fuel and oil
WARNING! This product is not supplied with petrol-oil mixture in the engine!
Before operating this product it is essential to fill it with petrol-oil mixture!
This product is equipped with a 2-stroke engine, the fuel and oil tank are combined and
it is essential to fill a fuel-oil mixture before operating this product. Observe the technical
specifications for suitable fuel and engine oil.
NOTE: To avoid spillage and to filter out debris, use a funnel with filter to fill
the bottle and the oil tank.
1. Place the product on a stable, level surface with the fuel tank cap (13) facing upwards.
We recommend laying a non-flammable sheet under the product.
2. Pour a regular-grade unleaded petrol and a quality engine oil for air cooled 2-stroke
engines in the supplied fuel mixing bottle (25) respectively via the 2 openings. Use
the scale markings on different sides for your desired ratio for petrol:oil. For example,
this indicates a correct ratio of 40:1 when using the scale 40:1.
3. Tilt and shake the container thoroughly to make the fuel.
NOTE: Use an anti-oxidant added quality oil expressly labelled for air-cooled
2 stroke engine use (JASO FC GRADE OIL or ISO EGC GRADE). Do not use
BIA or TWC (2 stroke water-cooling type) mixed oil. The recommended mixing
ratio for petrol:oil is 40:1.
NOTE: Never mix fuel and oil directly in the tank of the product.
100 ml
200 ml
300 ml
400 ml
24
WARNING! Fuel and oil are highly inflammable! Fumes will explode
if lit! Ensure that there are no naked flames around the product!
Do not smoke while filling fuel and oil!
+
+
+
+
=
2.5 ml =
5 ml =
7.5 ml =
10 ml =
TTCSP40
40:1