Titan TTB773HTG Manual page 9

TTB773HTG by TITAN
16. Safety Warnings for stripping paint. Before stripping
any paint, you should determine whether the paint
contains any lead. Paint containing lead should be
removed by a professional and not by using a heat
gun.
17. Ideally move the workpiece to an outdoor location.
If this is not possible, ensure the work area is well
ventilated.
18. Wear an approved dust respirator mask or dual filter
mask for dust and fumes. Ensure that the mask fits
properly. Disposable paper masks are not adequate.
19. Keep the gun moving when in use to avoid excessive
heat build up.
20. Keep food and drink out of the work area. Wash hands
and face thoroughly before eating or drinking.
The following information applies to professional users
only but is good practice for all users:
Vibration and noise reduction
To reduce the impact of noise and vibration emission,
limit the time of operation, use low-vibration and
low-noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimise the
vibration and noise exposure risks:
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct attachments for the product and ensure
they are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
Safety information
EN
09