Titan TTB773HTG Manual page 20

Product functions
EN EN
On/off switch
Position
NOTE: If you are not sure about the correct setting, start with a low
temperature setting and gradually increase the temperature until you
achieve optimum results.
Thermal protection
This product is equipped with a self-resettable safety cut-out which will operate to
cut off the power supply to the heating elements if the internal temperature gets
too high. It will reset automatically when the product has cooled down.
20
Setting
"I" – On ̛ Change the mode from high
C o o l - o f f temperature to cool temperature
position quickly.
50°C ̛ Reducing the cooling time of the
product before changing accessories
̛ Reducing the cooling time of the
product before storage
̛ Reducing the cooling time of the
workpiece
"II" – On, ̛ Removing paint
450°C ̛ Shrinking plastic sleeves
̛ Soldering pipes
̛ Bending plastic tubes
"III" – On, ̛ Removing stickers
600°C ̛ Defrosting taps and tubes
TTB773HTG by TITAN
Applications