Titan TTB773HTG Manual page 24

Operation
EN EN
Operation
Soldering pipes
> Apply suitable soldering grease or paste to the pipe ends to be soldered if
> Stick the pipe end together and warm the connection for 1 to 2 minutes
depending on the material.
> Apply the solder which will melt due to the workpiece temperature.
>
Removing stickers
> Many adhesives (e.g. stickers) become softer when heated allowing adhesive
bonds to be separated or adhesive to be removed.
> Heat the sticker carefully and pull it off.
24
TTB773HTG by TITAN
II
450°C
III
600°C