Basic Settings - Atag VA6113HT User Manual

10
1) 2)
Programme
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
3) In accordance with the 1016/2010 regulation.
4) In accordance with the 2019/2022 regulation.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, please include the
product number code (PNC) found on the
rating plate.

BASIC SETTINGS

You can configure the appliance by
changing basic settings according to your
needs.
Num‐ Settings
ber
1 Water hard‐
ness
2 Rinse aid level
3 End sound
4 Auto door
open
Water (l)
10.8 - 13.2
3) 4)
10.5 / 10.5
9.6 - 13.1
8.9 - 10.9
For any other questions regarding your
dishwasher, please refer to the service
book provided with your appliance.
Values
From level 1L
to level 10L
From level 0A
to level 6A
1b (on)
0b (off)
1o (on)
0o (off)
Energy (kWh)
0.97 - 1.11
3) 4)
0.821 / 0.835
0.74 - 1.06
0.58 - 0.70
1)
Description
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
Factory setting: 5L.
Adjust the level of the rinse aid according to
the necessary dosage.
Factory setting: 4A.
Activate or deactivate the acoustic signal for
the end of a programme.
Factory setting: 0b.
Activate or deactivate the AirDry.
Factory setting: 1o.
Duration (min)
160
3) 4)
240 / 240
120 - 170
60