Planning And Extending Your Alarm System - Honeywell Friedland GlobalGuard HISK1 Hardware Installation And Operating Manual

This hardware manual will only detail how to link
these devices to the Control Panel. To operate
these devices with a Programme, Schedule or
Event, please refer to the online software
manual available at
www.GlobalGuard.Friedland.co.uk.
PLANNING AND EXTENDING
YOUR ALARM SYSTEM
Before attempting to install your Alarm System it
is important to study your security requirements
and plan your installation accordingly.
PIR Movement Detectors are used to protect the
main areas of the property, (e.g. lounge, study,
hallway and landing). Magnetic Door/Window
Detectors are typically used to protect the main
access points to the property, (e.g. front door,
back door, patio doors etc). However, they can
also be used to protect other vulnerable doors/
windows or access doors to important rooms.
The use of ON/OFF wireless home automation
devices such as a Plugin Controller module
(HIS1A) or Bayonet Lampholder module
(HIS2A) can be used to simulate the presence of
occupants within the home whilst you are away.
TYPICAL INSTALLATION
The following example shows a typical property
incorporating the suggested positions for the
External Siren, PIR movement and Magnetic
Door/Window Contact Detectors.
Use this as a guide for your installation in
conjunction with the detailed positioning
requirements for each device provided in the
appropriate installation sections in this manual
for planning your intruder alarm system.
11