JPT YDFLP-E-20-M7-S-R User Manual page 25

YDFLP-E-20/30-M7 User Manual
Voltage error: alarm when supplying voltage is too low or too high.
DB25-D7-D0: monitor the current power signal of the laser, corresponding to the 8-bit binary
mode. D0 is the lowest bit, D7 is the highest bit, and the green light is the status of the received
signal of this bit.
DB25-PA: monitor whether the laser currently receives the PA signal, and the green light is the
status of the received signal.
DB25-MO: monitor whether the laser currently receives MO signal, and the green light is the
status of received signal.
Laser power: the power percentage of the pump source current conversion (it can be used to
refer to whether the output of the circuit is normal, not the output optical power value).
Circuit temperature: monitors the current laser circuit module temperature.
Optical path temperature: monitor the temperature of the optical path module of the current
laser.
Pulse width: monitor the working pulse width parameter of the current laser.
Frequency: monitor the current laser operating frequency parameter.
Warranty and service terms in User's Manual are for reference only. Official service
and warranty are subject to official contract.
File Number: J-SI-0036
24