Product Tour; Product Description - JPT YDFLP Installation Manual And User's Manual

1. Product Tour

1.1 Product Description

The JPT YDFLP pulsed fiber laser adopts the MOPA (Master Oscillator Power Amplifier)
configuration, in which a semiconductor laser diode serves as the master oscillator and the fiber
amplifiers boost the output power. For this MOPA pulsed fiber laser, the pulse width and pulse
repetition frequency are able to be adjusted independently. By changing the pulse width of the
fiber laser, the peak power of this MOPA fiber laser can be maintained at the same level for
different pulse repetition frequency. This feature makes the product an idea laser source for
various industrial applications.
The MOPA fiber lasers get pumps through fiber couplers, which embed them with higher
slope efficiency compared to conventional solid state lasers. The fiber laser is more compact and
easy to carry, because it only uses three cooling fans to effectively remove the heat generated
inside the chamber. Besides, the all fiber based laser cavity enables higher beam quality of the
laser output.
JPT's MOPA fiber laser adopts the standard DB25 interface, and it is power supplied with
24V/8A DC power supply, which makes it a good compatibility. A photograph of a typical JPT
MOPA fiber laser is as shown in Figure 2.
File Number: EFLP001‐B‐E
Figure 2 JPT's MOPA Fiber Laser
Shenzhen JPT Opto‐electronics Co. Ltd.
4
YDFLP Fiber Laser Installation
Guide and User Manual
Version：B Date:2016.4