NEC DSX User Manual page 9

1093057_rev1-09.qxd
Set Up A Conference (Telephone Meeting)
To set up a telephone meeting:
1. Place or answer your first call (Intercom or outside caller) + Press
2. Place or answer your next call (Intercom or outside caller) + Press
3. Press
– Repeat step 2 to add additional callers to your Conference.
– If you hear an error tone after trying to add another party, your Conference is full.
– To place a Conference on Hold, press
– If you Conference with two outside callers, you may be able to hang up and have them continue
Forward Calls To A Co-Worker or Voice Mail
To forward (reroute) your calls to a co-worker or voice mail:
While idle, push Menu+ Dial
1.
– Your display shows the current Call Forward setup, if forwarding is On or Off, or None if disabled.
To change your Call Forwarding settings, push Edit.
2.
Push Nextto scroll to the Call Forwarding type you want to set up.
3.
– Immediate.
– Ring No Answer.
– Busy No Answer.
– Off Premise Speed Dial.
– Off Premise Number.
– Answer Machine Emulation.
– Display Message.
– None.
For the selected type, push Selectand follow the on-screen guidance to enter the options. When
3.
setting the destination:
– Dial a co-worker's extension number or
– Press
Push Saveto save your entries, then Back+ Exitto exit.
4.
– Call Forwarding will only forward outside calls that directly ring your phone (such as calls trans-
All manuals and user guides at all-guides.com
7/31/09 2:42 PM Page 9
again to set up the Conference.
CONF
their conversation in an Unsupervised Conference .
to forward your calls to your mailbox.
V-MAIL
. To reinstate the Conference, press
HOLD
+ Select.
60
for the operator.
0
.
CONF
.
CONF
.
CONF