NEC DSX User Manual page 11

1093057_rev1-09.qxd
To install an optional corded headset:
1. Plug the headset cord into the headset jack on the bot-
tom of the telephone.
2. The headset cord routes through the upper channel on
the right side of the telephone base.
To set up a headset Feature Key:
Push Menu+ Dial
1.
Push Selectthen >>repeatedly to scroll to Headset .
2.
Push Selectto choose the Headset assignment.
3.
Push Back+ Exitto exit.
3.
To turn the headset mode on and off:
1. Press your Headset Feature Key.
– The headset key is on while in the headset mode; off while in the normal handset mode.
– You can optionally push Menuand dial
To use your headset:
1. While in the headset mode, you can do the following:
– Press a line key to place or answer an outside call.
– Press
– While on a call, press
2. Keeping the above three things in mind, process calls normally using the convenience of a headset.
About the DSX Wireless Headset Adapter (WHA)
The DSX Wireless Headset Adapter allows you to connect a Plantronics Wireless Headset System
directly to the headset jack on specific models of DSX telephones. The DSX Wireless Headset Adapter
tightly integrates your headset system with the DSX to provide enhanced wireless mobility and call
answering. The Plantronics lifter is not required. To learn more, download the DSX Wireless Headset
Adapter User guide from www.necdsx.com.
All manuals and user guides at all-guides.com
7/31/09 2:42 PM Page 11
Installing And Using a Headset
+ Press Feature Key.
51
to dial a co-worker on the Intercom.
INTERCOM
SPEAKER
.
91
to hang up.