Chapter 3. Configuration
.:
I
-
F THE SELF
TEST RESULTS ARE
PASS
BAD RAM DATA
BAD RAM ADDRESS
BAD CHECKSUM
BAD BOOT SECTOR
DS3F LOOPBACK FAILURE
ARTE TERMINAL LOOPBACK
FAILURE
or
ARTE INTERNAL LOOPBACK
FAILURE
CONFIGURATION CORRUPT
SAVE CONFIGURATION
The S
configuration changes to nonvolatile memory. If this option is not
selected after making changes to the configuration, the unit reverts
to its previous configuration when powered down.
3-18
...
T
...
HEN
the self-test was successful and the unit is ready to
use.
contact ADTRAN Technical Support. See Customer
Service, Product Support Information, and Training in
the front section of this manual.
S
select
AVE
C
ONFIGURATION
ADTRAN Technical Support.
C
AVE
ONFIGURATION
OSU 300 User Manual
C
from the main
ONFIGURATION
menu. If condition persists, contact
Figure 3-10. System Utilities Menu
selection commits the current
61200663L1-1