Table of Contents
Advertisement
Chapter 3. Configuration
DS3 NETWORK
To access the network configuration parameters, select 1- DS3
N
signal received from the service provider. During remote
configuration, this menu is read-only. The DS3 N
C
DS3 N
DS3 Timing
Set the timing to L
network; set to L
for the circuit.
Remote Auto-Configuration
This feature allows one OSU 300 (set to M
relay its DTE port bandwidth configuration to a second unit (set to
S
LAVE
XCV Threshold
Sets the threshold for code violations. Options include 1)D
2)1E-3, 3)1E-4, 4)1E-5, and 5)1E-6.
3-2
. Configure the OSU 300 network settings to match the T3
ETWORK
menu is shown in Figure 3-2. Descriptions of the
ONFIGURATION
fields follow the figure.
ETWORK
Figure 3-2. DS3 Network Configuration Menu
OOP
OCAL
). If desired, the feature can be disabled by either unit.
OSU 300 User Manual
if the OSU 300 is to derive timing from the
if the unit is to be the master timing source
ASTER
ETWORK
) to automatically
,
ISABLED
61200663L1-1
Advertisement
Table of Contents
