Initial Usb Connection - Renesas DA9318 User Manual

UM-PM-022
DA9318 Direct Charging Reference Board
6. Click Finish.
Once the installation is completed, you may need to restart your computer.
When the software is installed, insert the USB cable before applying V and V . The DA9318
SYS IN
SmartCanvas software can be started after power up.
6.2

Initial USB Connection

On connecting the USB to the PC for the first time, the SAM3U USB driver will request driver
updating/installation from the Windows operating system. On Windows 7 (32-bit) operating systems
(OS) the driver usually installs automatically. On Windows 7 (64-bit) machines it is common for the
complete driver installation to fail. If this happens, install the driver manually by following these steps:
1. Control Panel → Devices and Printers (double-click device with yellow exclamation sign).
2. Update Driver.
3. Browse my computer for driver software.
4. Select the Driver folder location: C:\Dialog Semiconductor\Power Management\DA9318
Reference GUI\Driver.
5. If Windows warns about the driver, select Install anyway.
6. Remove the USB cable and then re-insert it into the reference board.
User Manual Revision 3.2 16-Feb-2022
20 of 39
CFR0012 © 2022 Renesas Electronics