CKD MN4E0 Series Instruction Manual page 4

WARNING
●
Consult CKD about the specifications before using the product outside the
designated specifications or for special applications.
●
Turn off the power, stop the supply of compressed air and make sure that there is
no residual pressure before performing maintenance.
●
Before increasing or decreasing the number of stations (valves) on the manifold,
turn off the power and release pressure.
●
Thoroughly read and understand this Instruction Manual before removing or adding
a manifold solenoid valve.
●
Thoroughly read and understand this Instruction Manual before working on
electrical wiring.
CAUTION
●
Plan and perform daily and periodic inspections so that maintenance can be
managed properly.
●
Check the working voltage and polarity before wiring and energizing.
●
Turn off the power before wiring.
An electric shock may occur by touching the electrical wiring connection (bare live
part).
Do not touch live parts with bare hands.
●
Thoroughly read and understand this Instruction Manual before working on
electrical wiring.
●
Check the address setting value of serial transmission slave unit carefully before
use.
Improper address setting value may cause valves or cylinders to malfunction.
●
This product does not meet the surge immunity requirements specified in
EN61000-4-5 for CE marking. Please provide appropriate protective measures
against lightning surges on the device side.
●
Although the lamp on the valve may light up instantaneously when the valve power
is turned on, the valve itself will not be turned on or off.
[SM-P00081-A]
―3―