5-1-9. Setting inch/mm switching
• After completing 5-1-6 or 5-1-8, press the X-axis selector key to select the mode for setting
• Inch/mm switching can be enabled or disabled with the
• Inch/mm switching is enabled exfactory.
Example
X
0
or
whether or not inch/mm switching is performed.
Operating Procedure
Select the input to the first axis.
Press the
or
key.
Pressing the
or
key again returns to
the original display unit.
key or
key.
Display
(inch/mm switching enabled)
(inch/mm switching disabled)
(inch/mm switching enabled)
21