Sony Magnescale LH51 Instruction Manual page 3

[ For EU and EFTA countries ]
CE Notice
Marking by the symbol CE indicates compliance of the
EMC directive and the Low-voltage directive of the
European Community.
meets of exceeds the following technical standards.
EN 55 011 Group 1 Class A / 91 :
" L i m i t s a n d m e t h o d s o f m e a s u r e m e n t o f
electromagnetic disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency
equipment"
EN 50 082-2 / 95 :
"Electromagnetic compatibility - Generic immunity
standard Part 2 : Industrial environment"
EN 61 010-1 A1+A2 :
"Safety requirements for electrical equipment for
measurement, control and laboratory use Part 1:
General requirements"
Warning
When using this device with equipment governed by
Machine Directives EN 60 204-1, measures should be
taken to ensure conformance with those directives.
Warnung
Wenn dieses Gerät mit Ausrüstungsteilen verwendet
wird, die von den Maschinenrichtlinien EN 60 204-1
geregelt werden, müssen Maßnahmen ergriffen
werden, um eine Übereinstimmung mit diesen
Normen zu gewährleisten.
Such marking is indicative
[For the customers in Australia]
Australian EMC Notice
This product complies with the following Australian
EMC standards.
AS/NZS 4252.1 /94 EMC Generic Immunity Part1
AS/NZS 2064 /92 Emission Standard for ISM
Equipment
i