Energy: Alternatives And Home Automation - KitchenAid Vertigo Integrated Series Installation Manual

3. PREPARING THE INSTALLATION
ELECTRICAL AND WATER SUPPLY BEHIND THE UNIT
INTEGRATED AND
CLASSIC SERIES:
E
W
3.3 Energy: Alternatives
and Home Automation
INTEGRATED AND CLASSIC SERIES:
Electrical connection
Water connection
fig.1 Back of appliance
Operate as follows:
> Unwind the electric cable and connect it directly to
the wall socket.
> Make sure the appliance is in the Stand-by con-
dition and that all lights are off; should it be not so
press the Unit button to switch it off.
> Fit one end of the water hose onto the connector at
the appliance's back [ 1 ]
12
.
1
>
Fit the other end of the hose to the water tap, use
the gaskets provided in the Owner's Kit
X-PRO AND COUNTRY SERIES:
Electrical connection
fig.2 Back of appliance
Operate as follows:
> Unwind the electric cable and connect it directly to
the wall socket.
>
Make sure the appliance is in the Stand-by con-
dition and that all ights are off; should it be not so
press the Unit button to switch it off.
> Connect the water line to the threaded con-
nection at the base of the unit, as in figure
].
1
fig.3 Front of appliance
> Fit the other end of the hose to the water tap, use
the gaskets provided in the Owner's Kit
2
[ 2 ].
Water connection
[ 1
[ 2 ].