Table of Contents
Advertisement
605 to RJ-11 adapter
The 605 to RJ-11adaptor is provided to comply with the older
610 Telstra wall socket. The 605 to RJ-11 adapter may be used
to convert the supplied RJ-11 cable, if the older connection is
required.
USB cable
A typical USB cord has an "A" connection ("upstream" to plug into the computer) and a
"B" connection ("downstream" to plug into the device).
"A" Connection
By using different connectors on the upstream and downstream ends, cable connection is
simplified. The "B" connection will fit a into the "B" socket of any USB device.
Similarly, any "A" connector can be plugged into any "A" socket, such as on a computer.
If it is a new device, the operating system auto-detects it and asks for the driver disk. If
the device has already been installed, the computer activates it and starts talking to it.
USB devices can be connected and disconnected at any time.
www.netcomm.com.au
Page 106
"B" Connection
Rev.1 - YML686
NP5580/W User Guide
Advertisement
Table of Contents
