Table of Contents
Advertisement
One page setup for most ADSL services
1. Connect your computer to one of the four LAN ports on the NetComm NB5580/W
and ensure you have a link. Connect your ADSL enabled line to the ADSL port of
the NetComm NB5580/W using the RJ11 cable supplied.
2. Set the Network Card of your computer to use DHCP or assign it an IP address in
the range of 192.168.1.2 ~ 254.
3. Open a web browser (ensuring that it is set to access the Internet via the LAN, not
by a dial-up networking account). Browse to the NetComm NB5580/W's default IP
(192.168.1.1). The main menu of the router should open displaying the "One Page
Setup".
Note: You may be prompted for a log-in, there is no User Name and the default
Password is "admin".
4. Change your "WAN Connection Type" to "PPPoE (ADSL)".
5. Set your "User Name" and "Password" as provided by your ISP.
6. If you wish to make services available to external Internet users, even when you are
not using Internet services from inside your network, you can choose "Keep Alive".
Alternatively for extra security you can choose "Connect on Demand".
7. Click "Apply". Your NetComm NB5580/W will attempt to use your settings to
connect to your ISP. You can check the results on the "Status Monitor" page.
8. If you have a DHCP server already active on your network it is recommended that
you disable either the NetComm NB5580/W's built in DHCP server or the existing
DHCP server. Please note that Microsoft Internet Connection Sharing is a DHCP
server.
Rev.1 - YML686
NB5580/W User Guide
www.netcomm.com.au
Page 7
Advertisement
Table of Contents
