Table of Contents
Advertisement
Fixed IP Addresses Configuration
Fixed IP addresses may be assigned to network devices for many reasons, such as the
server computers or printers which are consistently accessed by multiple users. To set
up computers with fixed IP Addresses, go to the "IP Address" tab of the "TCP/IP
Properties" window as shown above.
1. Select "Specify an IP address" and enter "192.168.1.***" in the "IP Address"
location (where *** is a number between 2 and 254 used by the NetComm NB5580
to identify each computer), and the default "Subnet Mask" "255.255.255.0".
Note: No two computers on the same LAN can have the same IP address but
they should have the same Subnet Mask.
2. Select "Enable DNS" in the "DNS Configuration" tab and enter the "DNS IP
Address" obtained from your ISP in the "Server Search Order" location. Click
"OK".
www.netcomm.com.au
Page 98
Rev.1 - YML686
NP5580/W User Guide
Advertisement
Table of Contents
