De-Activating The Fetal Heart Rate Offset Feature - GE Corometrics 250cx Series Operator's Manual

De-Activating the Fetal Heart Rate Offset Feature

NOTE: If the auto-revert (10-min)
setting is selected on the password-
protected Install Options screen, the
shifted heart rate trace automatically
reverts to normal after 10 minutes.
5-12
Fetal Heart Rate Monitoring: Dual Fetal Heart Rate Monitoring
A right arrow (→) and a vertical dashed line print to draw attention to the start
of the shifted trend.
Refer to "Fetal Heart Rate Offset Example," on page 5-12 for an example of a
shifted trend.
After the FHR patterns have been assessed, set the secondary FHR trend back to the
normal (unshifted) position.
1. Ensure the recorder is on.
2. Press and hold the
screen.)
The trend returns to the unshifted position.
A left arrow (←) and a vertical dashed line print to draw attention to the
change.
1
Setting the FHR trend to the normal (unshifted) mode does not disable the HR
Offset function; it deactivates it. To disable the mode, refer to the 250cx Series
Service Manual.
58103
US2+20
FHR bpm
US US2 FMD HBC TOCO
100
12
10 75
8
50
6
4
25
2
250cx Series Maternal/Fetal Monitor
2036946-001
1
button for 3 seconds. (Or use the US/US2 Setup
Mark [Offset]
US2+20
FHR
3CM/MIN US US2 FMD
12
10
8
6
4
2
58104
240 bpm
210
180
150
120
90
60
30
HBC TOCO 3CM/MIN
100
75
50
25
Fetal Heart Rate Offset Example
Revision C