Using The Maternal Vital Signs History Screen; Displaying The Screen; Selecting The Hx Interval - GE Corometrics 250cx Series Operator's Manual

NOTE: NIBP values appear in kPa when in kPa mode.

Using the Maternal Vital Signs History Screen

Displaying the Screen

Selecting the HX Interval

12-4
Maternal Vital Signs History: Using the Maternal Vital Signs History Screen
US
154 135
Vital Signs History
Date: 24-Mar 24-Mar
Time: 12:00
NIBP
SYS 120
DIA 85
MAP 94
P 74
MSpO2
%02 98
P 76
MECG 75
HX Interval: 10 min
Print PrintAll
Select the VSHX softkey to display the Vital Signs History screen.
1.
2. Select the
the oldest data; scroll left towards the most recent data
3. Press the Trim Knob control to de-activate the
Select the Exit softkey to return to the main screen.
4.
The maternal Vital Signs History screen can be configured to display different columns
of data by adjusting the HX Interval field. The interval choices are: Event (to display
all events) and 1, 5, 10, 15, 30, and 60 minutes. (The factory default setting is Event.)
The history interval has no effect on the data being stored. You can change the
interval setting at any time and all data for the most recent 8 hours is available for
display.
250cx Series Maternal/Fetal Monitor
US2
24-Mar 24-Mar
12:10 12:20 12:30
122 122 125
87 90 95
95 94 105
76 75 81
99 99 100
77 75 81
74 75 81
View
VIEW
← →
softkey to scroll through the data. Scroll right roll towards
2036946-001
TOCO
17
24-Mar
12:40
124
90
98
77
98
78
78
Exit
Maternal Vital Signs History Screen
← VIEW →
softkey.
Revision C