Rebooting Or Resetting The Fastmile 5G Receiver - Nokia FastMile 5G14-B User Manual

User Guide
When repositioning the FastMile 5G Receiver, keep in mind the tips for determining
the best location listed in
installation
Disconnect the PoE injector from the electrical outlet.
Move the FastMile 5G Receiver and the PoE injector to a different location.
Plug the PoE injector to an electrical outlet at the new location (see
FastMile 5G Receiver to
Do the following as appropriate:

Rebooting or resetting the FastMile 5G Receiver

You can do a reboot or a factory reset of the FastMile 5G Receiver through the
following:
See
during a factory reset.
Note: The FastMile 5G Receiver might restart twice during a factory reset. This is normal
behavior.
You will need an M3 Phillips screwdriver to access the reset button and a paper clip
or similar to press the reset button.
If the FastMile 5G Receiver is installed, remove it from the mounting sleeve or
desktop stand by pressing on the clip at the bottom of the mounting sleeve or
loosening the clip on the base desktop stand to release the FastMile 5G Receiver.
3TG-02285-AAAA-TCZZA-02
location.
• if you are using the Nokia Wireless Mobile App to determine the best location,
resume use of the app
• run another speed test using Ookla through the Nokia Wireless Mobile App
• check the multicolor LED of the FastMile 5G Receiver (see
LED colors)
• do a signal test (see
• the WebUI as described in
• the Nokia Wireless Mobile App
• the reset button as described in this section
Understanding the LED colors
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
Using the Nokia Wireless Mobile App to find the best
power).
Using the signal test button)
System screen
for a description of the multicolor LED behavior
Troubleshooting
Connecting the
Understanding the
67