Removing A Window Mount - Nokia FastMile 5G14-B User Manual

User Guide

Removing a window mount

Once fixed in place, the adhesive strips on the mounting sleeve used for mounting
the FastMile 5G Receiver on a window should not be regularly detached from the
window. It is highly recommended that upon correct installation, the position is not
changed. However, detaching from the window is feasible as long as the measures
outlined in this section are taken.
If you do need to remove the mounting sleeve from a window, use a hair blow dryer
with a warm or hot setting to gradually warm up the adhesive strips and then peel
them off from the window at the same time. If you are going to move the mounting
sleeve to another window, be sure that the strips remain attached to the mounting
sleeve.
Note: The adhesive strips are reusable by gently washing with water and drying thoroughly.
Do not remove the strips from the mounting sleeve when cleaning them.
The mounting sleeve might not be as secure if you move it to another window. Repeated
reuse of the adhesive strips will reduce their adhesive strength. It is recommended that you
do not move the mounting sleeve too often.
3TG-02285-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
Troubleshooting
69