Table of Contents
Advertisement
Connecting an Analogue Satellite Receiver and VCR
• Connect a SCART lead between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect a SCART lead between the TV SCART socket on the
satellite receiver and the AUX SCART socket on the
Mediamaster.
• Connect a SCART lead between the VCR
and the 2:nd SCART socket on the
TV (if available).
• Connect an RF lead from the RF output on the
VCR to the TV aerial input on the TV.
• Connect an RF lead from the RF output on the
satellite receiver to the RF input socket on the VCR.
• Connect an RF lead from the TV/VCR output on the
Mediamaster to the RF input socket on the satellite receiver.
• Connect the TV aerial to the TV AERIAL input socket on the
Mediamaster.
• Connect the coaxial cable between the LNB and the LNB
socket on the satellite (analogue/digital) receiver.
Both the VCR and the analogue satellite receiver must be
tuned to different UHF channels than the Mediamaster when
using RF-connectors.
The analogue satellite receiver must be switched to OFF
(standby) when you want to watch digital terrestrial chan-
nels from the Mediamaster.
Connecting a HiFi system
• Connect an RCA/Cinch stereo cable from the AUDIO L R
sockets on the Mediamaster to the LINE, AUX, SPARE or
EXTRA input sockets on your HiFi system.
• If available you can connect an RCA/Cinch single cable from
the DIGITAL AUDIO socket on the Mediamaster to your HiFi
or Dolby Pro Logic system.
Note: To avoid interference you must use a screened audio
cable.
Connecting to the telephone wall socket
You will be offered interactive services from your Service Pro-
vider. You may then need to connect the Mediamaster to the tel-
ephone line.
• Connect the telephone modem cable (supplied) from the
TELEPHONE sockets on the Mediamaster to a telephone
socket.
2
1
RF
SCART
RF
Satellite receiver
Aerial
Dish
VCR
Media-
master
LNB
cable
GB 11
Advertisement
Table of Contents
