Nokia FastMile 5G14-B User Manual page 14

Installing the FastMile 5G Receiver
Note: The FastMile 5G Receiver might not start as expected without a SIM card.
You will need an M3 Phillips screwdriver to insert the SIM card in the FastMile 5G
Receiver.
Ensure that the FastMile 5G Receiver is not yet connected to the PoE injector or to
any other source of power.
Use the screwdriver to remove the screw from the bottom cover of the FastMile 5G
Receiver.
Figure 6
Remove the SIM tray from the SIM card slot.
Figure 7
14
• If after another PIN-locked SIM card with its PIN enabled is inserted and its PIN
is verified, for the first PIN-locked SIM card, the PIN code is needed when it is
inserted as described later in this document.
Location of the screw to access the SIM card slot
Location of the SIM card slot
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
User Guide
3TG-02285-AAAA-TCZZA-02