Huawei UPS2000-G Series User Manual page 78

UPS2000-G-(6 kVA-20 kVA)
User Manual
Issue 21 (2022-10-13)
Figure 4-29 Output screen
NO TE
The UPS supports 208 V output. In the case of 208 V output, the power is derated to
90%. The cable connections and cable connections for 208 V and 200 V are similar.
Table 4-19 Output settings
Item Description
Output Set the system output
mode mode. The input mode is
identified automatically
by the system. This
parameter is
configurable only after
the inverter is shut
down.
Voltage Indicates the system
level output voltage level.
After you change the
voltage level, the upper
threshold for bypass
voltage is restored to the
default value (15% or
20%). This parameter is
configurable only after
the inverter is shut
down.
Copyright © Huawei Technologies Co., Ltd.
Default Value Value Range
This Single–phase,
parameter is Three-phase
not
configurable
for the 6
kVA/10 kVA
models. The
default value
is Single-
phase.
15 kVA/20
kVA: Three-
phase
6 kVA/10 kVA: 6 kVA/10 kVA:
220 V 208 V, 220 V, 230
V, 240 V
15 kVA/20
kVA single- 15 kVA/20 kVA
phase output: single-phase
220 V output: 208 V, 220
V, 230 V, 240 V
15 kVA/20
kVA three- 15 kVA/20 kVA
phase output: three-phase
380 V output: 380 V, 400
V, 415 V
4 Control Panel
70