Wheels; Siting - Electrolux TD6-14 Installation Manual

4.3 Wheels

For ergonomic reasons the machine is equipped with wheels.
The wheels make it easy to move the machine without lifting it.
The wheels can only be used as long as the feet of the machine are not lowered.

4.4 Siting

The figure shows recommended distance to walls and/or other machines.
C
A
D=C+B
Y = For built-in machines it is recommended that the wall section Y is a removable finish piece. If so, E and F can be 0.
A 5–500 mm (Min. 5 mm)
B 500 mm (Min. 200 mm)
C Depth of machine
D D = C + B (Min. 1220 mm to be able to use the machine)
E Min. 40 mm
F Min. 25.4 mm (The overhead soffit may be used to close the gap above the machine. Min. required clearance: 0 mm)
Installation manual
B
A
1
2 = Side view on built in machine
1= Top view
Y
E
F
2
21
fig.X00717
fig.X00959A