Figure 2-3 Ac Power Switch, Ac Connector, And Retainer Clip - Sun Microsystems Enterprise 3500 System Installation Manual

5. Route the power cord through the power cord retainer clip.
In Step 6 of "Installing the Fiber Cable Organizer," you reattached the plastic clip to
the cable organizer that you mounted on the rear support bracket (
a. Use a Phillips screwdriver to open the plastic retainer clip and remove the
screw.
b. Place the power cord inside the open retainer clip and replace the screw to close
the clip.
6. Connect the male end of the power cord into a grounded outlet.
The outlet must be a 100-120 or 220-240 VAC 15A circuit.
AC power switch
AC connector
with power cord
FIGURE 2-3
2-4 Sun Enterprise 3500 System Installation Guide • August 2001
Retainer clip
AC Power Switch, AC Connector, and Retainer Clip
).
FIGURE 2-3