How To Proceed If A Repair Is Necessary - Vega VEGASWING 51 Operating Instructions Manual

7 Maintenance and fault rectification
Reaction after fault recti-
fication
22
Error Cause
Red signal lamp Vibrating fre-
flashes (switching quency out of
output high-im- specification
pedance)
Buildup on the vi-
brating element
Vibrating element
damaged
Depending on the reason for the fault and the measures taken, the
steps described in chapter " Setup" must be carried out again or must
be checked for plausibility and completeness.
7.3

How to proceed if a repair is necessary

You can find an instrument return form as well as detailed information
about the procedure in the download area of our homepage. By doing
this you help us carry out the repair quickly and without having to call
back for needed information.
In case of repair, proceed as follows:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Ask the agency serving you to get the address for the return ship-
ment. You can find the agency on our homepage.
Rectification
Check the vibrating element on build-
up and remove it
Check the vibrating element and
the sensor if there is buildup and re-
move it
Check if the vibrating element is dam-
age or extremely corroded
VEGASWING 51 • Transistor (PNP)