Function Table - Vega VEGASWING 51 Operating Instructions Manual

6 Setup
Level
Max. mode of op-
eration
Max. mode of op-
eration
Min. mode of op-
eration
Min. mode of op-
eration
Fault any
20
Caution:
It is absolutely necessary that you remove the test magnet from the
instrument housing after the simulation.
6.3

Function table

The following table provides an overview of the switching conditions
depending on the set mode and the level.
Switching sta- Control lamp
tus
Yellow - cov-
erage
closed
open
closed
open
open any
Control lamp Control lamp
Green - voltage Red - fault sig-
indication nal
VEGASWING 51 • Transistor (PNP)