Removing The Transceiver Module - Planet IFGS-1022HPT User Manual

Industrial 8-port 10/100tx 802.3at poe+ plus 2-port gigabit tp/sfp combo ethernet switch

Hide thumbs Also See for IFGS-1022HPT:

Table of Contents

3.4 Removing the Transceiver Module

1. Make sure there is no network activity by consulting or checking with the

network administrator. Or through the management interface of the switch/

converter (if available) to disable the port in advance.

2. Remove the Fiber Optic Cable gently.

3. Turn the lever of the MGB series module to a horizontal position.

4. Pull out the module gently through the lever.

MGB Series

Transceiver

Never pull out the module without pulling the lever or the

push bolts on the module. Directly pulling out the module with

force could damage the module and the SFP module slot of the

Industrial PoE+ Switch.

Figure 3-2: Pulling Out the Transceiver

Table of Contents