2. Tighten the wire-clamp screws for preventing the wires from loosening.
1. The wire gauge for the terminal block should be in the range
between 12 and 24 AWG.
2. The DC power input range is 48V ~ 54V DC.
PWR1 and PWR2 must provide exactly the same DC voltage for
power load balance while operating with dual power input.
Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
1
2
3
Power 1
Alarm
+
-
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
4
5
6
Power 2
+
-
Earth Ground
DC Input:
48-54V
, 5.5A max.
9