LED
Switching Specifications
Switch Architecture
Switch Fabric
Switch Throughput@64
bytes
MAC Address Table
Shared Data Buffer
Flow Control
Jumbo Frame
Power over Ethernet
PoE Standard
PoE Power Supply Type
Power Pin Assignment
PoE Power Output
3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Red: Power Fault Alarm
2 x LED for PoE Copper Port (Ports 1 to 8):
Green: LNK/ACT (10/100Mbps)
Amber: PoE-In-Use
2 x LED for 10/100/1000T Copper Port
(Ports 9 to 10):
Green: LNK/ACT
Amber: 1000
2 x LED for per mini-GBIC interface
(Ports 9 to 10)
Green: LNK/ACT
Amber: 1000
Store-and-Forward
5.6Gbps/non-blocking
4.1Mpps @64 bytes
16K entries
4Mb SRAM
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
10 Kbytes
IEEE 802.3at Power over Ethernet Plus/PSE
End-span
1/2(+), 3/6(-)
IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the
power supply), max. 15.4 watts IEEE 802.3at
Standard
- Per port 51V~54V DC (depending on the
power supply), max. 30 watts
13