Table of Contents
Advertisement
Available languages
Available languages
4.8 Event Recording
Critical event detection is triggered by the G-Sensor (Gravity Sensor) and
will auto-detect vehicle impacts and collisions. This will cause the camera
to protect the current video clip from being overwritten by locking it and
saving to the "Event" folder.
The vehicle driver can also manually lock the current video recording
session by pressing the
the screen.
The G-Sensor sensitivity is adjustable with 5 settings: 1, 2, 3, 4, 5, and off – it
is set to 3 by default. The G-Sensor can also be deactivated in "Record
Setup">"G-Sensor".
The Collision Detection sensitivity can be adjusted by the following three
settings: Low, Medium and High. Please go to "Record Setup" > "Parking
Mode"> "Collision Detection" to change as needed.
Event videos are stored in the "Video/Event" folder, and cannot be
automatically overwritten.
Infrared LED Auto
A
Infrared LED On
Infrared LED Off
Button. A key icon will appear at the center of
3840x2160P 25FPS
- 16 -
Advertisement
Table of Contents
