Vantrue OnDash N2S User Manual page 15

GPS Automatic Update is on by default. When it is on, GPS positioning
will locate the current time and date according to the set time zone.
Users can also turn off the GPS auto update function and set the time
and date manually.
Note: GPS Automatic Update requires users to select the correct time
zone. The time zone of the user can be found by searching the website
or locating the time zone on the phone.
4.4 Switch Front + Cabin or Front Recording Mode Resolution
The default setting is (Front + Cabin mode) 1440P+1440P 30FPS. You can
switch the dual recording resolution with following steps:
•
Go to "Record Setup">"Resolution" >"Front+Cabin", Press
1440P+1440P(30FPS) ; 1440P+1080P(30FPS); 1080P+1080P(30FPS);
1080P+720P(30FPS) ; 720P+1080P(30FPS); 720P+720P(30FPS);
GPS Automatic Update
Manually Set Date / Time
Time Zone
Front + Cabin
Front
- 12 -
1440P+1440P 30FPS
1440P+1080P 30FPS
1080P+1080P 30FPS
1080P+720P 30FPS
button,
OK