Vantrue OnDash N2S User Manual page 23

1440P+1440P 30FPS
4-1-2021
To manually activate Parking Mode, press and hold the button until
the P icon appears on the centre of screen.
1440P+1440P 30FPS
4-1-2021
NOTE: In Collision Detection + Motion Detection mode, if the dash cam
is turned off manully, it will turn on and record once it detects any
vibration.
4.10.3 Motion Detection Triggered
When the Motion Detection has been turned on, this is represented by
an Motion Detection icon at the bottom right corner of the screen. If no
movement is detected after 5 minutes of recording, there will be an
orange P icon appears in the center of the screen which means
Parking Mode is activated. Once the camera detects movement, 2
cameras will simultaneously start auto recording; they will stop record-
ing after 30 seconds of inactivity.
- 20 -