Vantrue OnDash N2S User Manual page 14

•
Frequency: Press
System Info: Press
•
Info)
Default Settings: Press
•
back to stock factory settings. Press the
the setup.
•
Speed Unit: Press
•
4.2.3 Files
Review and delete videos stored in the file folders.
• Event: Critical event videos detected by G-Sensor activity or manually
locked by user.
Normal: Standard videos recorded.
•
All: All the standard videos, critical event videos recorded.
•
4.3 Set Date/Time
Open the
press button to set the date/ time. Navigate
OK
and time values.
Press to confirm and proceed. To finish setup, just press the
OK
to exit.
NOTE: Date format is MM/DD/YY with the time in 24 hour format.
or
to check the current firmware version. (System
OK
OK
button select
OK
to select either KM/H or MP/H.
OK
interface, navigate to "System Setup" > "Time & Date", and
button to change the options: 50Hz/60Hz.
OK
and to reset the device
button to exit and complete
- 11 -
to select date
or
button