Vantrue OnDash N2S User Manual page 12

4.2 Menu Settings
After powering ON the camera, press the
process. (If the camera is recording video, press the
recording before pressing the
Record Setup
4.2.1 Record Setup
Press the
to navigate the different options.
Resolution: Press
•
Front+Cabin：
1440P+1440P 30FPS; 1440P+1080P 30FPS; 1080P+1080P 30FPS;
1080P+720P 30FPS; 720P+1080P 30FPS; 720P+720P 30FPS;
Front:
3840×2160P 30FPS; 2592×1520P 30FPS; 2560×1440P 30FPS;
1920×1080P 30FPS; 1280×720P 30FPS;
Loop Recording: Press
•
3Min, 5Min and Off.
IR LEDS: Press
•
Off.
G-Sensor: Press button
•
and Off.
Audio Recording: Press
•
OFF/ON.
button to enter the settings, and use the
or
button to change the options: Auto, On and
or
button.)
button to change the options:
button to change the duration: 1Min,
or
to change the sensitivity: 1, 2, 3, 4, 5
or
or
button to change the options:
- 9 -
button to enter the setup
button to stop
OK
or buttons