NEC e616 User Manual page 167

To
• Set the special occasion items
(Items with * must be completed
in order to set the event)
• Set the special occasion items
(Continued)
(Items with * must be completed
in order to set the event)
3 End the setting
When Reminder function turns on, the Alarm goes off on the set time. However if you confirm the
appointment from the Day screen before the reminder time, the Alarm does not go off. To set it again,
open the entry and set the Reminder turns on.
Toolbox
Do this
Filter view: Select the filter type from Public, Private, or All.
Press the Enter key.
Contents*: Input the contents (up to 150 single-byte
characters) and press the Enter key.
Date*: Input the date and press the Enter key.
Reminder: Turn on this item to remind you of the calendar
entry and press the Enter key.
Alarm: Select the clock alarm tune you want and press the
Enter key. You can hear the tune by selecting the tune name
and pressing the SK1 (Play) key.
Reminder date: Select the days before the start date from 0, -
1, -2, -3, -5, and -7. (e.g. Select -3 to notify 3 days before the
start date of the special occasion) Press the Enter key.
Reminder time: Input the time for reminder and press the
Enter key.
Repeat: This item is set if the calendar entry is recurring.
Select the cycle to repeat from Off, Monthly, and Yearly and
press the Enter key.
Note : Off indicates the special occasion item is non-recurring.
Monthly is used to set a particular date in the month.
An earlier date is set for the month without the date
specified (e.g. When 31 is specified, 28 is set in
February.)
Yearly is used to set a particular date in the year.
An earlier date is set for the year without the date
specified (e.g. When February 29 is specified for 2004,
February 28 is set in 2005.)
Note : Refer to To Select Multiple Items on page 49.
Press the SK1 (OK) key to end the editing. The Calendar
screen shows all entries set for the selected date.
-150-