Text Edit; To Enter A Space; To Insert A New Line; To Change The Case - NEC e616 User Manual

Text edit

When you edit text entered in the Contact list or messages, you can use the copy, cut, paste and clear
functions in the text input mode as shown below:

To Enter a Space

To enter a space in the text in the Multitap Text Input mode or the T9® Text Input mode, press the 0 key.

To Insert a New Line

To insert a new line in the text, move the cursor to the inserting point of the new line, press and hold the # key
or press the Options menu key and select New line.

To Change the Case

To change the alphabet case, press the
If the text input mode is the lower case mode in the beginning, press the
(the next input character will be in uppercase), press the
to return to the lower case mode.

To Change to Delete/Backspace Mode

To change to delete/backspace mode, press the Options menu key in the text input mode, select Editing
options, then select Delete or Backspace radio button for Clear mode.
In the Delete mode, you can delete characters after the cursor by pressing the C key. Pressing and holding
the C key deletes all characters after the cursor.
In the Backspace mode, you can delete characters before the cursor by pressing the C key. Pressing and
holding the C key deletes all characters before the cursor.

To Change to Insert/Overwrite Mode

To change to insert/overwrite mode, press the Options menu key in the text input mode, select Editing
options, then select Insert or Overwrite radio button for Write mode.
In the Insert mode, the cursor is expressed as a vertical line between texts, and you can insert characters at
the cursor position.
In the Overwrite mode, the cursor is expressed as a square over a text/space you can overwrite characters
starting at the cursor position.

To Delete Characters

In the Backspace mode, press the C key to delete the character to the left of the cursor. Pressing and holding
the C key will repeat this operation.
Text Entry
key in the Multitap Text Input mode or the T9® Text Input mode.
key again to caps lock mode, then press it again
-34-
key once to switch to shift mode