NEC e616 User Manual page 139

To
1 Start up the connection function
2 Register the PC to the handset
(pairing)
Connections
Do this
Press the MENU key
Bluetooth.
If the PC is not yet registered on Bluetooth screen, register it
by one of the following procedures:
Pairing from the PC Side
1 Press the Options menu key and select Pairing standby.
2 Execute the pairing operation from the PC, and then enter
Passkey. (Refer to the instructions manual of the PC for
details)
When the authentication is complete, the PC is registered
to Bluetooth screen.
Note : After going into Pairing standby, if the time set in
Pairing timer elapse without having any connection
request from other bluetooth devices, Pairing standby
will over.
Searching from the Handset Side
1 Put the PC in pairing standby mode. (Refer to the
instructions manual of the PC for details)
2 Press the Options menu key and select Search.
3 Execute the pairing with the detected PC, and then enter
Passkey. (Refer to the instructions manual of the PC for
details)
When the authentication is complete, the PC is registered
to Bluetooth screen.
Note : The Passkey referred to here is the Bluetooth PIN code
for the remote device (the PC). Refer to the instructions
manual of the PC for details.
Note : You can change for how long to search Bluetooth
devices by changing the value in Search timer under
Timeout settings.
-122-
select External connection