To Activate Data Exchange; To Transfer Data Between The Handset And A Pc; Synchronisation - NEC e616 User Manual

To use this functionality you must first install the "616 PC File Transfer Tool". Please see the relevant section
in the Software Manual.
It is not possible to use any other applications while data is being exchanged between your e616 and a PC.
Please note that certain recurring appointments are not supported by this handset and as such may not be
created on the handset during synchronisation.

To activate Data Exchange

Press "Menu" key select External connection

To Transfer Data between the Handset and a PC

This operation can only be controlled from the PC side.
To
1 Connect the e616 and the PC
2 Activate data exchange function
3 Run PC File Transfer Tool
4 Transfer data between the e616 and
the PC

Synchronisation

It is possible to synchronise your Calendar, Contacts and To Do lists locally between your e616 and a PC
using a USB cable, or remotely over-the-air with a '3' server.
Before attempting synchronisation, it is necessary to install the provided 'IntelliSync' software on to your PC.
Please see the Software Manual for further instructions. Once the software has been successfully installed,
an 'IntelliSync' logo will appear on your Windows Taskbar tray.
Contacts are treated as vCard files, whilst Calendar and To Do list entries as vCalendar files.
Please note that certain recurring appointments are not supported by this handset and as such may not be
created on the handset during synchronisation.
USB
Do this
Insert an USB cable to the power connector of the e616 and a
USB port of the PC.
Press the MENU key
Handset memory / Memory card.
Start the "616 PC File Transfer Tool" application on the PC
See the "PC Data Transfer Tool" section in the Software
Manual for specific instructions.
-127-
select External connection USB
Connections