To
•
Set the multiday event items
(Items with * must be completed
in order to set the event)
•
Set the day off items
Do this
Repeat: Set this item if the appointment is recurring. Select the
cycle to repeat from Off, Monthly, or Weekly and press the
Enter key.
Note : Off indicates the appointment is non-recurring.
Monthly is used to set a particular date in the month.
An earlier date is set for the month without the date
specified (e.g. When 31 is specified, 28 is set in
February.)
Weekly is used to set days of week. Select one or more
days using the Enter key.
Note : Refer to To Select Multiple Items on page 49.
Filter view: Select the filter type from Public, Private, or All.
Press the Enter key.
Contents*: Input the contents (up to 150 single-byte
characters) and press the Enter key.
Start date*: Input the start date and press the Enter key.
End date: Input the end date and press the Enter key.
Select either Public holidays or Weekly days off and press
the Enter key.
One day: Input the day and press the Enter key.
Weekly is used to set days of week. Select one or more days
using the Enter key. Saturday and Sunday are set as default.
-149-
Toolbox