To Establish Dial-Up Connection For Pc By Bluetooth - NEC e616 User Manual

To
5 Make or receive a voice/video call with
the bluetooth headset
6 Disconnect

To establish dial-up connection for PC by Bluetooth

Connecting the e616 to a PC via Bluetooth technology enables the PC to use the e616 just like a modem to
establish a dial-up connection to an Internet service provider.
Before Bluetooth can communicate with a PC, ensure Bluetooth Driver is installed. See the '616
Bluetooth Modem Setting File' section in the Software Manual for more information.
Please check that your network operator supports this service. Please contact 3 for further details.
Do this
Using the bluetooth headset, the following operations are
available:
• Make a call: While in the idle mode, press the button on
the bluetooth headset.
• Answer a call: While a call comes in, press the button on
the bluetooth headset.
• End a call: While talking with the headset, press the
button on the bluetooth headset.
• Switch to headset talk from handset talk: While talking
with the handset, press the button on the bluetooth
headset.
• Switch to handset talk from headset talk: While talking
with the bluetooth headset, perform disconnecting
operation on the handset screen, as described in
"Disconnect" below.
Note : When using Bluetooth headset, the sound quality may
drop as the distance from the handset becomes larger.
Note : Refer to the instructions manual of the headset for
details on the headset operation.
Select the headset name on Bluetooth screen and press the
Enter key, or press the SK2 (End all) key (ends all Bluetooth
connection and the standby status).
-121-
Connections